$64 TFCFL 12V DC Electric Lifting Magnet 2000N Electromagnet Solenoi Industrial Scientific Material Handling Products $64 TFCFL 12V DC Electric Lifting Magnet 2000N Electromagnet Solenoi Industrial Scientific Material Handling Products TFCFL 12V DC Credence Electric Lifting Electromagnet Solenoi 2000N Magnet Solenoi,DC,2000N,TFCFL,Magnet,/droppingly284940.html,Electromagnet,Electric,Industrial Scientific , Material Handling Products,Lifting,$64,12V,ez-planning.com Solenoi,DC,2000N,TFCFL,Magnet,/droppingly284940.html,Electromagnet,Electric,Industrial Scientific , Material Handling Products,Lifting,$64,12V,ez-planning.com TFCFL 12V DC Credence Electric Lifting Electromagnet Solenoi 2000N Magnet

TFCFL 12V DC Credence Electric Lifting Electromagnet Solenoi 2000N Magnet Quality inspection

TFCFL 12V DC Electric Lifting Magnet 2000N Electromagnet Solenoi

$64

TFCFL 12V DC Electric Lifting Magnet 2000N Electromagnet Solenoi

|||

Product description

Specifications:
Rated voltage: DC12V
Lifting capacity: 200kg / 2000N
Overall dimensions: 120 x 40 mm
Material: metal, electronic parts

Use environment:
*Avoid long-term adsorption of high temperature iron parts
*It will generate heat during use, allowing it to be in a natural heat dissipation state
*Use an external heat sink when used in a high temperature environment, and the temperature should be controlled within 130 degrees
* Do not hit the suction surface with hard angular objects. Once the suction surface is uneven, it will cause suction decrease, affect the adsorption effect

Installation and usage method
*The electric sucker uses a DC power supply, the common voltage is: DC12V
*The energization rate is 100% at the rated voltage and its range, and the suction power can be adjusted by adjusting the voltage (proportional relationship)
*Use screws to connect the screw holes on the back to install and fix

Precautions
The electric suction cup must meet the following conditions in use to reach the maximum suction value
1. The sucked object must be a material with good magnetic permeability.
2. Use power and voltage correctly.
3. The surface of the sucked object should be smooth and clean throughout the year.
4. The suction contact area of the sucked object must be greater than or equal to the suction surface of the electromagnet (electric chuck The maximum outer diameter).
5. The thickness of the sucked object can reach the nominal value of suction when the thickness is greater than 8MM, and the thickness is reduced decrease.
6. There can be no distance from the sucked object, and no objects can be separated. Anything that violates the above--Conditions, the suction power will be reduced, and it will not reach the maximum suction value indicated by the electric suction cup.

TFCFL 12V DC Electric Lifting Magnet 2000N Electromagnet Solenoi